|
1/6th Cobra Aerial & Wire Cutter Set
Class: 60-90 Models
SPS009
Aerial, antenna and wire cutter sets are simply the easiest way to add scale realism with the least amount of effort. Each aerial
set is accurately molded to replicate the full scale AH-1F/S Cobra helicopter.
1. VHF
2. Upper cable cutter
3. Lower cable cutter
4. IR Cable Cutter (front movable pod)
5. ADF
6. GPS
7. NAV / COM
8. Trailing VHF
|
Each antennas/cutter base should be lightly sanded and in situations with the longer items, the base can
be sanded to match the exact contour of the fuselage.
In most cases, the aerials, antenna and cutters can be bonded before the body paint is applied to the fuselage. Using
medium or slow cyanoacrylate, bond each of the aerial/antenna to the fuselage. If you are adding these to a painted
fuselage, we recommend that the painted surface below the aerial/antenna be lightly sanded to improve the bond to the
fuselage. After the glue has dried, the aerial/antennas can be detail painted or weathered to match your model.
