Home
 
 Jakadofsky
  Product List
   PRO
   PRO-X
   TurboProp
   Accessories
  Service
  Safety & AMA
  Turbine Theory
  Turboshaft Design
  FAQ
 Manufacturers
  Approach Eng
  Baumann
  Cine-Scale
  JMD Models
  Jomar
  OF Helitechnik
  RC Gear
  Starwood Models
  Super Scale
 Quick Links
  Promotions
  Rivet Kit
  CS Lighting Kits
  SLS Lighting Kits
  Videos
 
 
 Printable Version
  > Jakadofsky Jet Engines  >  Turbine Accessories

Components & Accessories

Jakadofsky turbines are engineered and manufactured to very high standards. This ensures that each engine delivers consistent and reliable performance and is as close to maintenance free as it gets in model helicopters. Some components in the fuel system will wear out over time and we have put together this section to allow our customers to find and purchase parts as needed.

Accessories  

Switch Harness
Turbine: RS & PRO
PJW130

The switch harness needs to be monitored like all other components in models. This is a quality switch harness and comes with the standard connectors for the AECU and the starter battery. The best source to monitor its condition is from the data console. The AECU's built in error codes will be the first indication of a problem, when voltages start to drop.

$47.52


Turbine Adjustable Wye Exhaust
Style: Single Wall
PJW1004

This turbine wye exhaust allows the modeler to choose the correct angle for each side exhaust tube before permanently fixing them in place. This allows for a longer overall lifespan for the exhaust if the turbine is moved to a new fuselage or mechanics. Intake tube is designed for the Jakadofsky turbine engine.

$389.68


Mini Data Console
Turbine: all models
PJW1500

Each turbine includes the standard data console however this is a large unit and can be difficult to hide inside a scale fuselage. The mini data console, measuring 3" x 1 1/4" x 1/2" [7.62 x 3.17 x 1.27cm] can be easily concealed or cleverly integrated and accessible after each flight.

$105.40



Clutch is not included.

Clutch Bell
Turbine: RS & PRO
PJW2000 series

The clutch and clutch bell are factory installed parts and are normally inspected during engine servicing. These are provided here to help modelers with Vario mechanics. When you place your order for your turbine, you can include the matching clutch bell for your mechanics and it will be installed to your turbine at no additional cost to you.

PJW2000-20$98.50PJW2000-26$98.50
PJW2000-22$98.50PJW2000-27$98.50
PJW2000-23$98.50PJW2000-28$98.50
PJW2000-24$98.50PJW2000-40$98.50
PJW2000-25$98.50PJW2000-40$98.50


Propane Tank Valve w/Festo Fitting
Turbine: RS & PRO
PJW2007

The propane valve screws down on top of the onboard propane tank and includes the top thumb screw to open and close the flow of propane/butane gas from the tank. A little tip is to mark on the tank with a permanent marker the open direction just as a reminder.

$80.00


Kerosene Electric Fuel Pump
Turbine: RS, PRO & PRO-X
PJW2050

This electric Kersosene fuel pump is the single most important part on the engine as it controls the speed of the turbine. This has proven very reliable and its performance is monitored from recording the fuel pump voltages over time.

$163.80


Kersosene Electric Fuel Valve
Turbine: RS & PRO
PJW2051

The fuel valve also called the fuel solinoid works in conjunction with the fuel pump and is controlled by the AECU. It functions as an on/off switch for the liquid fuel during engine startup and shutdown procedures.

$65.00