CH53 Sea Stallion

Consideration should be given to the amount of time needed to complete the CH53, the amount of money that will be invested and how you will transport the helicopter. Modelers interested in the turbine version should also inquire about mechanics, turbine engines and the necessary legal considerations.


CH53 Sea Stallion Scale Fuselage $1320.00

:: overview

:: includes

:: requires

:: accessories

:: gallery

The following parts are broken down into Turbine version and Gasoline version to give you a clearer view of the items that are required to complete each version.

Under "Other Equipment" we list the radio set, type of servos, recommended gyro and other accessories that we do not carry. These are for referrence and can be purchased through your favorite hobby shop.

Turbine Version:

SMT1001	LMT Turbine Mechanics with long main shaft	$1628.00
SM1001	Flexible Tail Drive Set 54"	$129.00
SM1007-56	Flexible Drive Coupling Set (2)	$48.00
SMT1000	Jakadofsky Starwood Edition Turboshaft Turbine Engine	$4660.00
OF610-12	Multi 6 Blade Main Rotor Head, for 12mm main shaft	$769.00
OF153-6	FRP Main Rotor Blade Set 655mm symm Airfoil, Set of 6	$393.55
OF121A	Multi 2-6 Blade Swashplate, 12mm	$146.00
OF089-12	Swashplate Follower for Multi Blades, 12mm	$51.14
OF4000	Multi Tail Rotor Ass with Gear Box, 4 Blade	$591.17
OF4500	Machined 45 Degree Tail Gearbox Assembly	$268.25

Gasoline Version:

8301	Vario Benzine Trainer, 12mm main shaft & 800mm blades
1023	Zenoah G230 Gasoline Engine
116/95	Silencer system for Gasoline Engine
SM1001	Flexible Tail Drive Set 54"	$129.00
SM1007-56	Flexible Drive Coupling Set (2)	$48.00
OF610-12	Multi 6 Blade Main Rotor Head, for 12mm main shaft	$769.00
OF153-6	FRP Main Rotor Blade Set 655mm symm Airfoil, Set of 6	$393.55
OF121A	Multi 2-6 Blade Swashplate, 12mm	$146.00
OF089-12	Swashplate Follower for Multi Blades, 12mm	$51.14
OF4000	Multi Tail Rotor Ass with Gear Box, 4 Blade	$591.17
OF4500	Machined 45 Degree Tail Gearbox Assembly	$268.25

Other Equipment:

• 8-10 Channel 2.4GHz transmitter and receiver.

• Piezo gyro, heading lock & rate mode with adjustable pirouette rate.

• High speed rudder servo to match the requirements of the gyro.

• Gasoline Mechanics, 3 high torque servos for cyclic/collective with a min. torque rating of 70oz/in.

• Turbine Mechanics, 3 Matched high torque servos for cyclic with a minimum torque rating of 132oz/in.

• Heavy duty switch harness, servo extensions and 1800Mah receiver battery.

• Epoxy, Epoxy filler, JB Weld and cynoacrylate adhesives.

• Paint, masking tape and spray equipment for finishing.

• A selection of metric hex keys, drivers, pliers and cutters.

• Rotory Moto tool for cutting, sanding and finishing fiberglass.

• Drill and drill bits for mounting windshield hardware and installing lighting.