CH53 Sea Stallion

Following the same trend as other scale model manufacturers, OF has invested extra time and attention to produce several accessories for this fuselage. The scale multi rotor head, multi blade set, 45 degree tail gearbox and scale 4 blade tail rotor unit are all available. A creative modeler can add as much or as little detail and operable features to this fuselage, partly due to its size and reliable power plants.


CH53 Sea Stallion Scale Fuselage $1320.00

:: overview

:: includes

:: requires

:: accessories

:: gallery

Customers who have purchased the CH53 fuselage have also purchased the following items.

OF Main Rotor Head, 6 Blade
OF610-12

The 6 blade rotor head was originally designed for this model, looks fantastic and flys better. OF's matching blade set consists of 3 matched pairs. Replacement blades are purchased in pairs.

Main Rotor Head, 6 Blade - 12mm

$935.36

Blades sets may differ slightly from the photo above.

655mm Main Rotor Blades OF153 Symmetrical Series
These fiberglass main rotor blades consist of three matched sets for the 6 blade scale rotor head. Blades are gelcoated in white but can be easily painted for your model.

655mm Main Blade Set, LH, Airfoil S (6)

$461.80

OF Multi Blade Swashplate OF121A
OF's machined Aluminum 12mm swashplate will work with 2-6 blade rotor heads and is can be configured for standard or CCPM control mechanics. Each swashplate includes enough steel balls for the 6 blade configuration.

Multi Blade Swashplate - 12mm

$148.52

OF Multi Blade Swashplate Follower (Driver) OF089-12
OF's swashplate follower will work with all rotor heads and swashplates for 2 to 7 blades. It clamps around the main shaft and synchronizes the swashplate to the rotor head, commonly known as mechanical phase adjustment.

Multi Blade Swashplate Follower - 12mm

$60.24

OF Machined 45 Degree Tail Gearbox Assembly OF4500
Gearbox: Aluminum In/Out: 5mm Gears: Steel Couplers: Torque Drive Vario Style	Building a new scale model or rebuilding an older one? OF's machined 45 degree tail gear box is a very clean solution to an old problem. Scale models with elevated tail booms present the challenge of driving the tail around a corner. Times have changed an this all metal tail gearbox is very reliable with steel gears. Gearbox comes assembled and has been liberally greased.

45 Degree Tail Gearbox Assembly

317.00

OF Machined 4 Blade Multi Tail Gearbox Assembly OF4000
Hub: Aluminum Grips: Composite Span: 3.1" [30.7cm] (Bolt to Bolt) Root: 5mm Blade Bolt: 3mm	Looking for a quality tail gearbox that actually fits into the top pilon of your Apache, Blackhawk or Sea Stallion? Elevated tail units present this unique challenge when trying to adapt a standard tail gearbox off a pod and boom. OF's all machined tail gearbox is an excellent solution.

4 Blade Multi Tail Gearbox Assembly

699.72

Scale Pilot - Orange, Brown Harness & Helmet OFCH53P
Scale: 1/10th Height: 5.25"[13.3cm] Width: 2.25"[5.7cm]	OF's scale pilot comes finished ready to pilot your scale helicopter. Is fixed in a seated position with arms that are configured to hold cyclic flight control and a throttle or collective lever.

Scale Pilot - Orange w/ Helmet

$34.20

	Starwood Scale Rivet Kit SM0100 A simple but very efficient way to apply authentic scale rivets to models. Using the included syringe and assortment of needle tips, almost any type of rivet pattern and size is possible. Tools clean up with water and the kit includes enough rivet material to complete four large models. $29.95