Bell 407 Long Ranger

Less consideration is needed for building this fuselage as it is smaller overall. Other than the amount of time needed to build the Bell 407, this is a simple fuselage to complete. Modelers interested in building a turbine version should inquire about proper mechanics, turbine engine and any necessary legal issues in your area or local flying field.


Bell 407 Long Ranger Fuselage $848.00

:: overview

:: includes

:: requires

:: accessories

The following parts are broken down into Turbine version and Gasoline version to give you a clearer view of the items that are required to complete each version.

Under "Other Equipment" we list the radio set, type of servos, recommended gyro and other accessories that we do not carry. These are for referrence and can be purchased through your favorite hobby shop.

Turbine Version:

LMT1003	LMT Turbine Mechanics 1250 left hand with long main shaft	$call
PJW-RS	Jakadofsky PJW-RS Turboshaft Turbine Engine	$5540.80
OF410-12	Multi 4 Blade Main Rotor Head, for 12mm main shaft	$673.28
OF155	FRP Main Rotor Blade Set 655mm symm Airfoil, Set of 4	$316.20
OF121A	Multi 2-6 Blade Swashplate, 12mm	$148.52
OF089-12	Swashplate Follower for Multi Blades, 12mm	$60.24

Gasoline Version:

8301	Vario Benzine Trainer, 12mm main shaft & 800mm blades
1023	Zenoah G230 Gasoline Engine
116/95	Silencer system for Gasoline Engine
OF410-12	Multi 4 Blade Main Rotor Head, for 12mm main shaft	$673.28
OF155	FRP Main Rotor Blade Set 655mm symm Airfoil, Set of 4	$316.20
OF121A	Multi 2-6 Blade Swashplate, 12mm	$148.52
OF089-12	Swashplate Follower for Multi Blades, 12mm	$60.24

Other Equipment:

• 8-10 Channel FM/PCM Transmitter and receiver.

• Piezo gyro, heading lock & rate mode with adjustable pirouette rate.

• High speed rudder servo to match the requirements of the gyro.

• Gasoline Mechanics, 3 high torque servos for cyclic/collective with a min. torque rating of 70oz/in.

• Turbine Mechanics, 3 Matched high torque servos for cyclic with a minimum torque rating of 132oz/in.

• Heavy duty switch harness, servo extensions and 1800Mah receiver battery.

• Epoxy, Epoxy filler, JB Weld and cynoacrylate adhesives.

• Paint, masking tape and spray equipment for finishing.

• A selection of metric hex keys, drivers, pliers and cutters.

• Rotory Moto tool for cutting, sanding and finishing fiberglass.

• Drill and drill bits for mounting windshield hardware and installing lighting.

Bell 407 and Bell Textron are registered trademarks of Bell Helicopter and are property of their respective owners.