AH-64D Apache
LM1016

As with Len's other fuselages, he will take the extra time and effort to produce several accessories for the Apache. Check back to see the fine accessories that will be available for the Apache.

The entire cockpit was scratch built and detailed by Len Mount. He hope you will find inspiration in these highly detailed photos of what is possible in scale models.


LM1016 Apache AH-64D Scale Fuselage for Gasoline Mechanics $1952.00

:: overview

:: includes

:: requires

:: accessories

Customers who have purchased the Apache fuselage have also purchased the following items.

	Super Scale 1/6th Hellfire Missile Set SPS005 & SPS006 Missile sets can be purchased in 2 or 4 at a time and include all the components to complete each missile. The resin cast parts are easily bonded to the missile body and add that scale realism that is not offered other manufacturers. More Info Hellfire Missile Set (2) $29.95 Hellfire Missile Set (4) $49.95

	Super Scale 1/6th Apache IR Jammer Set SPS004 This detail set comprises of 4 rectangular IR Jammers, 4 mounts, 4 radar warning antennas, two video pods and a round cap for the TADs turret. The jammer set can be easily added to the fuselage before or after priming and is easily painted to match your fuselage. More Info $39.95

OF Main Rotor Head, 4 Blade
OF410-12

The 4 blade rotor head looks fantastic and flys better. OF's scale head is the perfect scale for this model and their matching blade set consists of 2 matched pairs. Replacement blades are purchased in pairs.

Main Rotor Head, 4 Blade - 12mm

$673.28

Blades sets may differ slightly from the photo above.

670mm Main Rotor Blades OF064 Left Hand
These fiberglass main rotor blades consist of two matched sets for the 4 blade scale rotor head and the Vario Benzine Gas mechanics that rotates Left Hand. Blades are gelcoated in white but can be easily painted for your model.

670mm Main Blade Set, LH, Airfoil S (4)

$316.20

OF Multi Blade Swashplate OF121A
OF's machined Aluminum 12mm swashplate will work with 2-6 blade rotor heads and is can be configured for standard or CCPM control mechanics. Each swashplate includes enough steel balls for the 6 blade configuration.

Multi Blade Swashplate - 12mm

$148.52

OF Multi Blade Swashplate Follower (Driver) OF089-12
OF's swashplate follower will work with all rotor heads and swashplates for 2 to 7 blades. It clamps around the main shaft and synchronizes the swashplate to the rotor head, commonly known as mechanical phase adjustment.

Multi Blade Swashplate Follower - 12mm

$60.24

OF Machined 4 Blade Multi Tail Gearbox Assembly OF4000
Hub: Aluminum Grips: Composite Span: 3.1" [30.7cm] (Bolt to Bolt) Root: 5mm Blade Bolt: 3mm	Looking for a quality tail gearbox that actually fits into the top pilon of your Apache, Blackhawk or Sea Stallion? Elevated tail units present this unique challenge when trying to adapt a standard tail gearbox off a pod and boom. OF's all machined tail gearbox is an excellent solution.

4 Blade Multi Tail Gearbox Assembly

699.72

OF Machined 45 Degree Tail Gearbox Assembly OF4500
Gearbox: Aluminum In/Out: 5mm Gears: Steel Couplers: Torque Drive Vario Style	Building a new scale model or rebuilding an older one? OF's machined 45 degree tail gear box is a very clean solution to an old problem. Scale models with elevated tail booms present the challenge of driving the tail around a corner. Times have changed an this all metal tail gearbox is very reliable with steel gears. Gearbox comes assembled and has been liberally greased.

45 Degree Tail Gearbox Assembly

317.00

	Flexible Tail Drive Set 54" LM1001 For models: Apache, CH53, Cobra, Lynx, Puma, & Huey The flexible tail drive cable is 1/4" in diameter and consists of two spiral wraps of wire that are counter-wound. When properly installed, this flexible drive cable will provide reliable long term, trouble free performance. The brass support housing is included. $129.20

	Starwood Scale Rivet Kit SM0100 A simple but very efficient way to apply authentic scale rivets to models. Using the included syringe and assortment of needle tips, almost any type of rivet pattern and size is possible. Tools clean up with water and the kit includes enough rivet material to complete four large models. $29.95