|
|
|
UH-1C Huey
LM1014
As with Len's other fuselages, he has spent the extra time and attention to
produce several accessories for each specific fuselage. The instrument panel is a fine example, the
actual panels have the instrumentation resin molded which only require painting and he includes a
color photograph of the full scale for reference. |
|
| |
| LM1014 Huey UH-1C Scale Fuselage for Gasoline Mechanics $1640.00 |
 |
| LM1014T Huey UH-1C Scale Fuselage for Turbine Mechanics $1980.00 |
|
Customers who have purchased the Huey fuselage have also purchased the following items.
|
 |
Huey Scale Instrument Panel Set
LM1014PS
The instrument panel set includes a complete molded instrument panel with dashboard, sun visor and center console. A printed photo of
each instrument is included for painting.
$122.00
|
| |
|
|
 |
Dual wall stainless steel straight exhaust diverter - Huey
TJ1002
Manufactured of from thin stainess steel sheet, the outside of the Huey exhaust diverter remains relatively cool
and is mounted within the helicopter while the inside shroud deflects the engine's exhaust safely upwards towards the
main blades.
$225.00
|
| |
|
|
 |
Flex-Drive Tail Drive Set 54"
LM1001
For models: Apache, CH53, Cobra, Lynx, Puma, & Huey
The flexible tail drive cable is 1/4" in diameter and consists of two spiral wraps of wire that are counter-wound. When
properly installed, this flexible drive cable will provide reliable long term, trouble free performance. The brass support
housing is included. Steel couplers are not included and must be purchased to match your mechanics.
$129.00
|
| |
|
|
 |
Flexi-Drive Couplings 5mm (2)
LM1007-5/5
These steel flexible drive couplers make the connection from the 4.7mm flexible cable to the 5mm steel
takeoff shafts on the mechanics. They are a simple item that perform well when installed correctly on
flat spots ground into both the takeoff shaft and the prepared end of the flexible shaft. Two couplers
included.
$48.00
|
| |
|
|
 |
Flexi-Drive Couplings 5mm/6mm (2)
LM1007-5/6
These steel flexible drive couplers make the connection from the 4.7mm flexible cable to the 5mm
and 6mm steel takeoff shafts on the mechanics. They are a simple item that perform well when installed
correctly on flat spots ground into both the takeoff shafts and the prepared ends of the flexible
shaft. The 6mm coupler is shorter for easy identification.
$48.00
|
| |
|
|
 |
Starwood Scale Rivet Kit
SM0100
A simple but very efficient way to apply authentic scale rivets to models. Using the included syringe and assortment of needle tips,
almost any type of rivet pattern and size is possible. Tools clean up with water and the kit includes enough rivet material to complete
four large models.
$34.50
|
| |
|
|
|
|
;)
;)
;)