Comanche RAH-66
LM1013

The Comanche fuselage is the next awesome attack helicopter. The multi rotor head and Fenestrom tail makes this a great challenge for modelers and the finished helicopter model is aggressive in flight. The modeler has quite a lot of latitude on how much scale detail can be added. The creative modeler can scratch build the retractable armament bays and Gatling gun.


LM1013 Comanche RAH-66 Scale Fuselage $970.00

:: overview

:: includes

:: requires

:: accessories

The following components are broken down help give you a clearer view of the items that are required to complete the fuselage. We stock the Vario gas mechanics with Fenestrom tail unit but other 60 glow and gasoline mechanics can be adapted with custom modifications to mount the fenestrom tail unit.

Under "Other Equipment" we list the radio set, type of servos, recommended gyro and other accessories that we do not carry. These are for referrence and can be purchased through your favorite hobby shop.

Gasoline Version:

OF510-12	Multi 5 Blade Main Rotor Head, 12mm	$775.20
OF153-5	FRP Main Rotor Blade Set 655mm symm Airfoil, Set of 5	$389.00
OF121A	Multi 2-6 Blade Swashplate 90° and 120°, 12mm	$148.52
OF089-12	Swashplate Follower for Multi Blades - 12mm	$60.24

1002/24	Vario Gasoline Mechanics with Fenestrom Tail Unit
1023	Zenoah G230 Gasoline Engine
116/95	Silencer system for Gasoline Engine
35/32	Vario Main Rotor Shaft, 12x214mm Petrol & Multi Blade
800/20	Tail Rotor Holder, Aluminum 20mm dia, Black

Additional Comanche Components:

SCM003	Fenestron VOG Tail Unit - 11 Blades	$630.00

• 150mm section of tailboom.
• 3 Mechanical Retracts, struts and wheels.
• 3 Retract Servos with custom build linkages & servo extensions.

Other Equipment:

• 8-10 Channel 2.4GHz transmitter and receiver.

• Piezo gyro, heading lock & rate mode with adjustable pirouette rate.

• High speed rudder servo to match the requirements of the gyro.

• Gas Mechanics, 3 high torque servos for cyclic/collective with a min. torque rating of 70oz/in.

• Heavy duty switch harness, servo extensions and 1800Mah receiver battery.

• Epoxy, Epoxy filler, JB Weld and cynoacrylate adhesives.

• Paint, masking tape and spray equipment for finishing.

• A selection of metric hex keys, drivers, pliers and cutters.

• Rotory Moto tool for cutting, sanding and finishing fiberglass.

• Drill and drill bits for mounting windshield hardware and installing lighting.