AH-1S Cobra
LM1010

The Cobra is a great fuselage that you can install either gasoline or turbine mechanics and it is always a show stopper at the flying field. The modeler has quite a lot of latitude on how much scale detail is included but it should be noted that this is still a large fuselage. Considerations have to be made in terms of transporting the helicopter. Modelers interested in the turbine version must also apply for a waiver and become certified with the AMA.


LM1010 Cobra AH-1S Scale Fuselage for Gasoline Mechanics $1289.00
LM1010T Cobra AH-1S Scale Fuselage for Turbine Mechanics $1513.00

:: overview

:: includes

:: requires

:: accessories

:: gallery

The following parts are broken down into Turbine version and Gasoline version to give you a clearer view of the items that are required to complete each version.

Under "Other Equipment" we list the radio set, type of servos, recommended gyro and other accessories that we do not carry. These are for referrence and can be purchased through your favorite hobby shop.

Turbine Version:

LMT1001	LMT Turbine Mechanics 950 left hand with long main shaft	$1631.00
LM1001	Flexible Tail Drive Set 54"	$129.20
LM1007-56	Flexible Drive Coupling Set (2)	$52.80
PJW-RS	Jakadofsky PJW-RS Turboshaft Turbine Engine	$5540.80
68/50	Vario Washout unit, for 12mm main shaft
72/40	Vario Benzine Metal Head Block, 12mm main shaft
76/20	Vario Benzine Metal Blade Grips (2)
702/40	Vario Rotor head assembly, for 12mm main shaft
421	Vario GRP Main rotor blade set 800mm
832/68	Vario CCPM 120 degree swashplate, for 12mm main shaft
1003/80	Vario Aluminum Tail Gear Box with 6mm tail output shaft

Gasoline Version:

LM1001	Flexible Tail Drive Set 54"	$129.20
LM1007-56	Flexible Drive Coupling Set (2)	$52.80
8301	Vario Benzine Trainer, 12mm main shaft & 800mm blades
1023	Zenoah G230 Gasoline Engine
116/95	Silencer system for Gasoline Engine
68/50	Vario Washout unit, for 12mm main shaft
72/40	Vario Benzine Metal Head Block, 12mm main shaft
76/20	Vario Benzine Metal Blade Grips (2)
702/40	Vario Rotor head assembly, for 12mm main shaft
421	GRP Main rotor blade set 800mm
832/68	CCPM 120 degree swashplate, for 12mm main shaft
1003/80	Aluminum Tail Gear Box with 6mm tail output shaft

Other Equipment:

• 8-10 Channel 2.4GHz transmitter and receiver.

• Piezo gyro, heading lock & rate mode with adjustable pirouette rate.

• High speed rudder servo to match the requirements of the gyro.

• Gasoline Mechanics, 3 high torque servos for cyclic/collective with a min. torque rating of 70oz/in.

• Turbine Mechanics, 3 Matched high torque servos for cyclic with a minimum torque rating of 132oz/in.

• Heavy duty switch harness, servo extensions and 1800Mah receiver battery.

• Epoxy, Epoxy filler, JB Weld and cynoacrylate adhesives.

• Paint, masking tape and spray equipment for finishing.

• A selection of metric hex keys, drivers, pliers and cutters.

• Rotory Moto tool for cutting, sanding and finishing fiberglass.

• Drill and drill bits for mounting windshield hardware and installing lighting.