|
|
|
AH-1S Cobra
LM1010
Another fine example of Len Mount's expert craftsmanship. This fuselage is
one of his larger models that is available for gasoline and turbine mechanics. The sheer amount of
detailing that is on the surface of the fuselage is impressive and only gets better when the first
coat of primer is sprayed and all of the details can be easily seen. |
|
| |
| LM1010 Cobra AH-1S Scale Fuselage for Gasoline Mechanics $1480.00 |
 |
| LM1010T Cobra AH-1S Scale Fuselage for Turbine Mechanics $1680.00 |
|
Customers who have purchased the Cobra fuselage have also purchased the following items.
|
 |
Super Scale 1/6th Cobra Aerial & Wire Cutter Set
SPS009
More Info
Aerial and antenna sets are simply the easiest way to add scale realism with the least amount of effort. Each aerial
set is accurately molded to replicate the full scale AH-1F/S Cobra helicopter.
1/6th Cobra Aerial & Wire Cutter Set $24.50
|
| |
|
 |
Cobra Scale Instrument Panel Set
LM1010PS
The instrument panel set includes the dashboard for both the pilot and the gunner. A printed photo of
each instrument is included for painting and further detailing is easy to copy from any photo book on the Cobra.
$38.00
|
| |
|
|
 |
Dual wall stainless steel straight exhaust diverter - Cobra
TJ1003
Manufactured of from thin stainess steel sheet, the outside of the Cobra exhaust diverter remains relatively cool.
The mounting is within the fuselage and comes out flush with the scale fiberglass exhaust shroud. Internal deflectors
safely vent the engine's exhaust upwards towards the main blades.
$225.00
|
| |
|
|
 |
Kaowool Thermal Insulation, 500 x 1000mm
LMT1035
The heat from model engines has always been a concern for scale modelers however this is significant on our turbine models.
The Kaowool thermal paper is simply the best solution for this problem, it will protect your fiberglass from hot exhaust gas
and is lightweight. Apache AH-64D pictured here.
$25.00
|
| |
|
|
 |
Cobra Antenna & Wire Cutter Set
LM1010AS
This simple resin modeled set really adds to the scale realism that has been modeled from the full scale AH-1S helicopter. Bond in place during construction and paint
with when the body color is sprayed.
$24.50
|
| |
|
|
 |
Flex-Drive Tail Drive Set 54"
LM1001
For models: Apache, CH53, Cobra, Lynx, Puma, & Huey
The flexible tail drive cable is 1/4" in diameter and consists of two spiral wraps of wire that are counter-wound. When
properly installed, this flexible drive cable will provide reliable long term, trouble free performance. The brass support
housing is included. Steel couplers are not included and must be purchased to match your mechanics.
$129.00
|
| |
|
|
 |
Flexi-Drive Couplings 5mm (2)
LM1007-5/5
These steel flexible drive couplers make the connection from the 4.7mm flexible cable to the 5mm steel
takeoff shafts on the mechanics. They are a simple item that perform well when installed correctly on
flat spots ground into both the takeoff shaft and the prepared end of the flexible shaft. Two couplers
included.
$48.00
|
| |
|
|
 |
Flexi-Drive Couplings 5mm/6mm (2)
LM1007-5/6
These steel flexible drive couplers make the connection from the 4.7mm flexible cable to the 5mm
and 6mm steel takeoff shafts on the mechanics. They are a simple item that perform well when installed
correctly on flat spots ground into both the takeoff shafts and the prepared ends of the flexible
shaft. The 6mm coupler is shorter for easy identification.
$48.00
|
| |
|
|
 |
Starwood Scale Rivet Kit
SM0100
A simple but very efficient way to apply authentic scale rivets to models. Using the included syringe and assortment of needle tips,
almost any type of rivet pattern and size is possible. Tools clean up with water and the kit includes enough rivet material to complete
four large models.
$34.50
|
| |
|
|
|
|
;)
;)
;)
;)
;)