SLS Lighting System
SLS100
We have seen great advances in LED technology in recent years but this lighting kit
from JMD Models is a refreshing return to traditional LED lamps that are bundled into a 'plug and play'
system. Extremely light-weight, pre-assembled components and low power consumption makes this the
perfect lighting system for our models. Simple and quite elaborate lighting can be easily achieved.
SLS100 SLS Standard Lighting System (6 Lights) $110.00
In simple installations, from opening the box to completing the installation
can be done in a few minutes after deciding the lamp locations and positioning the control module in
relation to the receiver. The fine wire for the lamps can be easily taped in place and routed through
small access holes in the fuselage.
The system has direct support for landing light control through the servo connector.
The landing lights are controlled from whichever channel the receiver is plugged into and are normally
triggered using an available switch assigned to the channel. If there is no available channel, the
control module can either be installed using a 'y' connector (not included) with your throttle channel
(ESC) or on an auxiliary channel. Transmitters with mixing functions and an extra auxiliary channel
can use a free program mix to turn on landing lights automatically at a given throttle setting.
Landing lights are the most common use of the remote ports on the module but they
can similarly be used to control any other scale effect. It is a functional trigger that can be
controlled from the transmitter. It can be used for nearly any other scale action, effect or to make
components move on your model. A little creativity and some basic experimentation can go very far and
be quite a lot of fun.
