Xtrem Lighting Kit
Deluxe Dual Module Series

This lighting system is a great example of a common scale accessory that has been designed by a modeler for use in scale models. This deluxe package includes the Xtrem 6 output remote module and the Xtrem 3 output flashing module along with 6 high intensity Luxeon LED assembled leads. Unlike regular LEDs, the Luxeon versions are extremely bright and highly visible during the day, but even better near sunset and at night.


SCE002 Xtrem Deluxe Dual Module Lighting Kit $268.00

:: overview

:: includes

:: requires

We are now distributing the Cine-Scale lighting system in the USA. Cine-Scale produces modular lighting kits that are compact and can be configured for different flashing, solid and remotely controlled on/off modes. Some assembly is required to solder the Luxeon LED wire leads to the matching leads on either the Xtrem 6 or the Xtrem 3 modules depending on how you configure the lighting on your model. From previous experience, many scale modelers will construct a custom wiring harness can be easily made to fit your particular scale model. Then using a connector system one lighting module can be used on several different models, saving the cost of owning multiple modules and simply needing to buy the Luxeon leads to construct additional harnesses. It really depends how inconvienent it is to move the lighting modules and battery to different models and whether it is worth the extra time. Cine-Scale LEDs do not operate using receiver power, due to their higher amperage draw. They must use a separate battery source to power the LEDs which is consists of a minimum of 6.0 volts.

The Xtrem Deluxe kit includes 1 x Xtrem 6 output remote module, 1 x Xtrem 3 output flashing module and 6 x Luxeon (Red x 3,White x 2, Green x 1) LED wired leads that can be configured as up to 5 flashing and 4 solid lights. 6 Luxeon leads are provided but the lighting kit can accomodate 3 more depending on your particular lighting needs. Solder each colored LED into the desired output on the module. The two remote blocks are normally used for White landing lights but they can also be used to turn the Red/Green navigation lights on and off. The modules are designed for Luxeon LEDs and are not recommended for use with an other components.

General Features:
•  High quality microprocessor controlled modules.
•  Ultra bright Luxeon LEDs each with 180cm wire leads.
•  Each module has an adjustment pot for changing the flashing rate.
•  Standard female servo connector for battery input.
•  Heat shrink tubing provided for insulating each connection.

Xtrem 6 Specifications:
Module Dimensions: 35 x 31 x 7mm
Weight without LED leads: 15g
Length of output LED wire pairs: approximately 13cm
Length of input Receiver lead: approximately 20cm
Voltage for Module: 4-5 cells Nicad/Nimh (4.8-6 Volts)
Voltage for LEDs: 5 cells Nicad/Nimh or 2S Lipoly (6-7.4 Volts)
Includes standard 'JR' style servo connector for receiver.
One block of 2 flashing LEDs that operate continuously.
Two blocks of 2 solid LEDs that can be switched on / off remotely.

Xtrem 3 Specifications:
Module Dimensions: 35 x 27 x 7mm
Weight without LED leads: 10g
Length of output LED wire pairs: approximately 13cm
Voltage for Module: 4-5 cells Nicad/Nimh (4.8-6 Volts)
Voltage for LEDs: 5 cells Nicad/Nimh or 2S Lipoly (6-7.4 Volts)
One block of 3 flashing LEDs that operate continuously.

Warning: main(../inv/items/legal/trademark_luxeon.php): failed to open stream: No such file or directory in /home/sites/site30/html/products/inv/pagecontent/SCE002o.php on line 91

Warning: main(../inv/items/legal/trademark_luxeon.php): failed to open stream: No such file or directory in /home/sites/site30/html/products/inv/pagecontent/SCE002o.php on line 91

Fatal error: main(): Failed opening required '../inv/items/legal/trademark_luxeon.php' (include_path='.:/usr/share/pear') in /home/sites/site30/html/products/inv/pagecontent/SCE002o.php on line 91


	Previous Page	Contact Information: Sales: 650-851-9027, Email: sales@starwoodmodels.com