Rotorway Exec
LM1017

This fuselage is far simpler than most of Len Mount's models. Completing the fuselage typically can be accomplished in under a month including a custom paint job. Transporting this fuselage is no different from any other large glow or gas powered model. This fuselage is a nice change for Len and we hope to see more civilian and sport models in the future.

Photograph courtesy of Rotorway Intl.


LM1017 Rotorway Exec Scale Fuselage $661.00

:: overview

:: includes

:: requires

:: accessories

The following parts are broken down into the Gasoline version to give you a clearer view of the items that are required to complete the model. Most 60-90 glow powered models will work equally well in this fuselage. The only issue normally with glow powered models is routing the exhaust. As glow model engines have increased in displacement, there are fewer compact mufflers commercially available for use in scale applications. Fortunately, Len's fuselages are generally wider around the mechanics so there is less of a problem, but some considerations must be taken into account.

Under "Other Equipment" we list the radio set, type of servos, recommended gyro and other accessories that we do not carry. These are for referrence and can be purchased through your favorite hobby shop.

Gasoline Version:

8301	Vario Benzine Trainer, 12mm main shaft & 800mm blades
1023	Zenoah G230 Gasoline Engine
116/95	Silencer system for Gasoline Engine

Other Equipment:

• 8-10 Channel FM/PCM Transmitter and receiver.

• Piezo gyro, heading lock & rate mode with adjustable pirouette rate.

• High speed rudder servo to match the requirements of the gyro.

• Glow or Gas Mechanics, 3 high torque servos for cyclic/collective with a min. torque rating of 70oz/in.

• Heavy duty switch harness, servo extensions and 1800Mah receiver battery.

• Epoxy, Epoxy filler, JB Weld and cynoacrylate adhesives.

• Paint, masking tape and spray equipment for finishing.

• A selection of metric hex keys, drivers, pliers and cutters.

• Rotory Moto tool for cutting, sanding and finishing fiberglass.

• Drill and drill bits for mounting windshield hardware and installing lighting.


	Previous Page	Contact Information: Sales: 650-851-9027, Email: sales@starwoodmodels.com