AH-64D Apache
LM1016

Consideration should be given to the amount of time needed to complete the Apache, the amount of money that will be invested and how you will transport the helicopter. Its size is quite impressive once the tail boom section has been mounted.

The missiles, missile mounts and mast mounted radar dome are not included and were scratch built by Len Mount.


LM1016 Apache AH-64D Scale Fuselage for Gasoline Mechanics $1790.00

:: missingFile

The following parts are broken down into the Gasoline version to give you a clearer view of the items that are required to complete the scale model.

Under "Other Equipment" we list the radio set, type of servos, recommended gyro and other accessories that we do not carry. These are for referrence and can be purchased through your favorite hobby shop.

Gasoline Version:

8301	Vario Benzine Trainer, 12mm main shaft & 800mm blades
1023	Zenoah G230 Gasoline Engine
116/95	Silencer system for Gasoline Engine
LM1001	Flexible Tail Drive Set 54"	129.00
LM1007-56	Flexible Drive Coupling Set (2)	$48.00
OF410-12	Multi 4 Blade Main Rotor Head, for 12mm main shaft	$530.00
OF062-4	FRP Main Rotor Blade Set 670mm S Airfoil, LH Set of 4	$270.70
OF121A	Multi 2-6 Blade Swashplate, 12mm	$146.00
OF089-12	Swashplate Follower for Multi Blades, 12mm	$51.14
OF4000	Multi Tail Rotor Ass with Gear Box, 4 Blade	$591.17
OF4500	Machined 45 Degree Tail Gearbox Assembly	$268.25

Other Equipment:

• 8-10 Channel 2.4GHz transmitter and receiver.

• Piezo gyro, heading lock & rate mode with adjustable pirouette rate.

• High speed rudder servo to match the requirements of the gyro.

• Gasoline Mechanics, 3 high torque servos for cyclic/collective with a min. torque rating of 70oz/in.

• Turbine Mechanics, 3 Matched high torque servos for cyclic with a minimum torque rating of 132oz/in.

• Heavy duty switch harness, servo extensions and 1800Mah receiver battery.

• Epoxy, Epoxy filler, JB Weld and cynoacrylate adhesives.

• Paint, masking tape and spray equipment for finishing.

• A selection of metric hex keys, drivers, pliers and cutters.

• Rotory Moto tool for cutting, sanding and finishing fiberglass.

• Drill and drill bits for mounting windshield hardware and installing lighting.


	Previous Page	Contact Information: Sales: 650-851-9027, Email: sales@starwoodmodels.com