Previous Page   Contact Information:  Sales: 650-851-9027,  Email: sales@starwoodmodels.com
 
  > Baumann Fuselages  >  1/9.3 Bell 212

Bell 212


Like many fuselage manufacturers, the basic fuselage is just a starting point, at a minimum, decisions should be made for mechanics, tail drive system, scale main and tail rotor units. This is a smaller fuselage, well suited for gasoline and glow mechanics which will fit nicely and fly very scale.


 
B309001  Bell 212 Scale Fuselage  $779.00  
 
:: overview :: includes :: requires :: accessories

The following parts will give you a clearer view of the items that are required to complete the fuselage. We recommend and stock the Vario gas mechanics but other 60 class glow and gas mechanics can be fitted. If you have plans to use the Bambi Bucket then gasoline mechanics are the best choice and will effortlessly handle the additional loading.

Under "Other Equipment" we list the radio set, type of servos, recommended gyro and other accessories that we do not carry. These are for referrence and can be purchased through your favorite hobby shop.

Gasoline Version:
1002/21Vario Gasoline Mechanics w/12mm main shaft & swashplate  
1023Zenoah G230 Gasoline Engine  
116/95Silencer system for Gasoline Engine  
LM1001Flexible Tail Drive Set 54"$129.20  
LM1007-56Flexible Drive Coupling Set (2)$52.80  

Other Equipment:
•  8-10 Channel 2.4GHz transmitter and receiver.
•  Piezo gyro, heading lock & rate mode with adjustable pirouette rate.
•  High speed rudder servo to match the requirements of the gyro.
•  Gasoline Mechanics, 3 high torque servos for cyclic/collective with a min. torque rating of 70oz/in.
•  Turbine Mechanics, 3 Matched high torque servos for cyclic with a minimum torque rating of 132oz/in.
•  Heavy duty switch harness, servo extensions and 1800Mah receiver battery.
•  Epoxy, Epoxy filler, JB Weld and cynoacrylate adhesives.
•  Paint, masking tape and spray equipment for finishing.
•  A selection of metric hex keys, drivers, pliers and cutters.
•  Rotory Moto tool for cutting, sanding and finishing fiberglass.
•  Drill and drill bits for mounting windshield hardware and installing lighting.