Along with all the Baumann products, there are plenty of scale accessories the can be used virtually any scale model that you are building. Baumann puts extra effort into his products to achieve both very scale appearances and in many cases the scale detailing is operational as in the case of the door hinges and door handles.

Multi 5 Blade Tail Rotor Hub Set
B303009

This five blade tail hub set is designed for a 5mm diameter tail output shaft. Each molded tail grip is supported on two radial bearings and a thrust bearing for precision tail control. This is a superior design using a spacer bolted into the tail grips to ensure that both radial bearings are equally loaded. This truely adds to the realism of a scale model like the Puma or Seaking. Modelers switching from a two blade tail need to gear down the tail output RPM to achieve the same precision tail control.

$295.29

	Aluminum Cable Cutters B307002 These cable cutters have an impressive amount of detail as the cutters are built up of several layers of Aluminum sheet with scale rivets. Can be painted or left unfinished. Very scale when installed. $46.76

Wipers are sold individually.	Windshield Wiper 100mm (1) B307004 These windshield wipers are actually built like real wipers and have a blade surface, the curved mount and will pivot on the arm. The wipers are sold individually and come black but can be painted to match your model. Total length: 100mm, wiper blade length: 80mm. $8.05

Puma Aluminum Radar Dome
B307005

The radar dome is perfectly suited for the Puma but can be used on other models. It is designed to mount directly to the OF scale rotor heads but can be easily adapted for other scale heads. Its smooth, top surface is easily painted to match your model.

Product Update: Baumann has changed this item from a fiberglass dome with Aluminum fitting to a one piece machined Aluminum component. 06/22/2010

$155.97

	Pitot Tubes B307006 All helicopters and have Pitot tubes mounted usually on the nose. These resin cast tubes can be installed and painted to match your model. Air flows through tube and its velocity is measured to provide airspeed to the pilot. $18.12

	Puma Opening Panels B307008 To allow easier access to the upper mechanics and swashplate area on the Puma, these accessory panels can be hinged to open instead of the regular screw mount attachment. Panels can be painted to match your model. $17.36

Handles are sold individually.

Metal Door Handle (1 handle)
B307021

Each door handle is metal and includes a metal mount that is attached using the included rivets. On the inside of the door is a tab that allows the door to have a locked position for flying and unlocked position for static display. This super scale door handle works great with metal door hinges. Note: Handles are packaged individually at this price, to receive 2 handles, change the basket quantity to 2.

$9.13

	Metal Door Hinges B307026 Each door hinge is metal and includes metal tabs to be bonded into the main cabin while the hinge is attached to the door using the included rivets. This super scale hinge set is a great accessory that can be mounted closed in a fixed position or allow the door to be opened. $34.90

	Ventilation Grill B307087 This is a unique item from Baumann that adds amazing realism to your fuselage. This ventilation grill is installed with screws (not included) and can be painted to match your model. Grill measures ?mm x ?mm x ?mm. Product Update: Baumann has changed this item, it is now manufactured from fiberglass. 06/22/2010 $7.25

Wipers are sold individually.	Windshield Wiper 75mm (1) B307100 These windshield wipers are actually built like real wipers and have a blade surface, the curved mount and will pivot on the arm. The wipers are sold individually and come black but can be painted to match your model. Total length: 75mm, wiper blade length: 60mm. $8.05

Screw set included but not shown.

Cowl Latch Set (4)
B307129

This cowling or fairing latch set is identical to the full scale version used on modern helicopters. Baumann has recreated the latches and mounts in extreme detail which are completely functional on your scale model. Mounts are resin cast while the hinges are machined aluminum and include all hardware for mounting. Once installed, the latch set can be easily painted to match your paint scheme.

$142.28


	Previous Page	Contact Information: Sales: 650-851-9027, Email: sales@starwoodmodels.com