|
|
|
EC 135 Series
Fenestron Air Flow Rectifier
This is another great scale accessory from Cine-Scale. The attention to detail is fantastic and it really adds
realism to EC 135's operating Fenestron tail. It comes in kit form and can be easily painted to match your fuselage paint scheme.
It will fit both the Cine-Scale and Vario Fenestron tail units and the length of each vane can be custom cut to match your model.
|
|
| |
| SCM135-004 EC 135 Fenestron Air Flow Rectifier $89.37 |
 |
While this scale accessory looks fantastic, it is for experienced modelers. There is a lot of preparation required to get all 10 vanes properly aligned. It is not
difficult but requires patience and a heathy amount of position-view-reposition before finally bonding the vanes to the hub. The other challenge is installing it into
your EC135 fuselage tail. Again with proper preparation it is straight forward but you need to decide whether the vanes are anchored in the tail
cutout or are just bonded in place. Both methods work well but if you choose to anchor the vanes, when the hub is bolted to the Fenestron center then the vanes
are attached. It takes more planning but will also strengthen the tail.
After examining the kit, it is not as difficult as we had anticipated. Building this scale accessory only takes patience and a little time.
|
Features:
• High quality Polyurethane and Carbon reinforced components.
• Direct fit to Cine-Scale and Vario Fenestron tail units.
• Easily painted to match your model.
Compatibility / Fits Models:
• Vario EC 135 Fuselages with Fenestron Tail: #1320, #1330 & #1340.
|
|
|
