|
|
|
Bell 212
The Bell 212 was Baumann's second super scale fuselage. The Bell 212 is suitable for glow and gasoline
mechanics, includes landing gear and can be further detailed with the large selection of optional scale accessories. The Bell 212 is molded from high
quality, lightweight Epoxy resin with a white gelcoat surface.
|
|
| |
| B309001 Bell 212 Scale Fuselage $697.07 |
 |
| |
The Bell 212 is a twin engine, medium weight transport helicopter used today in mostly in civilian roles, but became famous
during the Vietnam conflict as a troop transport under the UH-1N and UH-1H designations. The large
cabin area makes the Bell 212 an ideal helicopter for transport with up to 12 passengers but its versatility, low maintenance and reliable power make it
a popular choice for operations in Fire Fighting, Emergency Medical Services (EMS) and Arial Work. Bell 212s have been seen widely in scientific roles but are
well known for their respectable 3000lb cargo lift operations. The Bell 212 has been recently retasked in security patrols in support of homeland security as needed, in the wake of September 11, 2001.
The size of the Bell 212 fuselage is well suited to glow but gasoline mechanics will easily accomodate additional scale features like the Bambi bucket or
hoist hook that are available. On opening the fuselage box, you will immediately see the quality of the fiberglass and it already has a
white gelcoat surface that is ready for adding any scale detailing, rivets or scale accessories. New modelers should be aware that between opening your new
Bell 212 fuselage box and finishing the model can take between 1 to 6 months, depending on how much time you can commit to building and finishing. |
Features:
• High quality gelcoated fiberglass components manufactured using Epoxy resin.
• Major openings are pre cut including the pilot & side doors, windshield, windows and top hatch.
• Pilot and cabin doors can be openable with additional hinge hardware.
• Vaccuum formed clear windshield, upper and lower cheek windows are included.
• Panel lines on the nose, top hatch, around the door openings and the tail boom.
• Tail boom section has separate hatch access for tail drive system.
• Formed aluminum landing struts & skids with mounting hardware included.
• Detailed instruction manual included with plenty of photographs.
• Plywood formers are precision cut on plywood.
|
Fuselage Specifications:
Rotorspan: 59" [150cm]
Length: 61.4" [156cm]
Width: 9 1/2" [24cm]
Height: 15 1/2" [39.5cm]
Engine: 60-90 Glow
23-26cc Gasoline
|
 |
Box Size:
47" long x 16" tall x 20" wide
[119cm x 47cm x 51cm]
|
|
|
|
