> Approach Fuselage Kit  >  AH-64A Apache Electric	Printable Version

AH-64A eApache AP103 You couldn't ask for a more complete fuselage. Approach Engineering has thought everything through about mounting the mechanics into their fuselage. While bending the tail belt has been done before, we are not aware of using this solution inside a scale fuselage, a least not in this class yet. Nearly any modeler can fully detail this fuselage and have an awesome fuselage for their electric model. AP103  AH-64A eApache Scale Fuselage Assembly Kit  $352.00

The following items are broken down to give you a clearer view of the items that are required to complete the model. Due to the narrow fuselage width, some electric models will work and some will not. The best check is to measure your helicopter mechanics at its widest point, normally it is at the main gear or the lower mechanics. The distance from the bottom of the fuselage to the top swashplate hole is 7" which provides plenty of space for electric mechanics. The internal maximum width for this fuselage is 4 5/8" [11.7cm] and the working internal length is 13" [33cm] which is quite sufficient to fit all of the electronics, flight battery and mechanics. If your mechanics are slightly wider 3/16"~5/16" [5-8mm] then it is still possible to fit, but you will need to be creative in adding a detail to the outside to "hide" the extra width or relocate the problematic parts on the mechanics, but this is not alway possible. Being that this is built up fuselage, making this type of change is simple and easy as you can see the interference problems. In a fiberglass fuselage, it is usually a fight right from the beginning just to remove enough parts just to get the mechanics to sit in the basic fuselage.

Under "Other Equipment" we list the radio set, type of servos, recommended gyro and other accessories that we do not carry. These are for referrence and can be purchased through your favorite hobby shop.

Other Equipment