|
| |
|
AH-64A Apache 50
AP100
This fuselage gives back the confidence to the modeler that they can build and finish an Apache scale helicopter without
many of the hassles associated with a fiberglass fuselages. The model is simple to build, is lightweight and can be
repaired for pennies. It takes more time to finish but as you can see the results are quite excellent for a standoff sport
scale fuselage.
AP100 AH-64A Apache Scale 50 Fuselage Assembly Kit $324.96  |
Customers who have purchased the AH-64A Apache fuselage have also purchased the following items.
SLS Standard Lighting System (6 Lights)
SLS100 [more info]
The SLS kit is super easy and flexible scale navigation lighting system. It is completely
'plug and play' to connect all the lamp wiring to its module and then to your receiver. The system supports
1 ramping beacon, 2 independent strobes, 3 solid lamps and 2 remote switched lamps. Includes 5mm LED lamps
on 24" [61cm] leads.
$110.00
Super Scale 1/10th Hellfire Missile Set (4)
SPS011 [more info]
Four missiles are included and have all the components to complete each missile. The balsa fins and
resin cast nose and tail cone are easily primed and bonded to the missile body and add that scale realism for
scale models in the 30-50 class.
$22.95
Raptor Tail Drive Shaft Adapter
AP200
Looking for a unique fuselage for your Raptor? Approach Engineering's tail drive shaft conversion allows you
to install your Raptor mechanics into any fuselage that uses a low tail boom and elevated tail rotor like the AP100 Apache
fuselage and is designed to work with their 4mm flexible tail drive shaft. Flexible drive shaft not included.
$149.96
Starwood Scale Rivet Kit
SM0100
A simple but very efficient way to apply authentic scale rivets to models. Using the included syringe and assortment of needle tips,
almost any type of rivet pattern and size is possible. Tools clean up with water and the kit includes enough rivet material to complete
four large models.
$29.95
Handles are sold individually.
Baumann Metal Door Handle (1 handle)
B307021
Each door handle is metal and includes a metal mount that is attached using the included rivets. On the
inside of the door is a tab that allows the door to have a locked position for flying and unlocked position for static
display. Note: Handles are packaged individually at this price, to receive 2 handles, change the basket quantity to 2.
$9.61
Scale Fittings - Wire Cutters & Antenna
LHC202
A larger selection of antenna, fueling valves and wire cutters. Suitable for 30-60 size models and to
add that little bit of scale realism with these plastic fittings that can be easily painted to match your model or simply
attach directly.
$10.50
|
|
